Overview - Renesas DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
3

Overview

The DA16200/DA16600 is a highly integrated ultra-low power Wi-Fi system on chip (SoC) that allows
users to develop Wi-Fi solutions using a single chip. Evaluation Kits and SDKs are provided to
simplify the process of starting a project with the DA16200 or the DA16600.
This document provides step by step guides to start using the Evaluation Kit and SDK by providing
details on:
●
DA16200 and DA16600 EVK (see Section 4)
●
How to connect to EVB (see Section 4.4)
●
How to program firmware images to the DA16200/DA16600 (see Section
●
How to provision and test Wi-Fi connections (see Section 4.6)
●
How to install development tools, build applications, and program firmware images in e
(see Section 5)
●
How to debug applications (see Section 5.6)
●
How to perform various test procedures to demonstrate the capabilities of DA16200/DA16600
(see Section 6)
Once completing these steps, the EVK and development environment are ready for developing a
complete Wi-Fi solution.
If Wi-Fi solutions being developed are based on a host MCU that uses the DA16200/DA16600 only
as a Wi-Fi communication interface through AT commands, then a prebuilt firmware image can be
used to develop that solution. For details on how to use AT commands, see the following documents:
●
UM-WI-003, DA16200 DA16600 Host Interface and AT Command, Ref.
●
UM-WI-061, DA16200 DA16600 Getting Started with AWS-IoT Core, Ref.
If the Wi-Fi solution being developed requires special functions or it is a standalone solution using
only the DA16200/DA16600, then the SDK can be used to develop a new firmware image for that
solution. For more information on how to use the SDK to develop an application, see the following
document:
●
UM-WI-046, DA16200 DA16600 FreeRTOS SDK Programmer Guide, Ref.
User Manual
CFR0012
Revision 1.9
8 of 108
4.5)
2
studio
[5]
[6]
[2]
Apr. 05, 2024
© 2024 Renesas Electronics