Before You Begin; Convert The Ip Trunk Cards - Avaya Nortel Communication Server 1000 Manual

516 Convert IP Trunk Cards to Voice Gateway Media Cards

Before you begin

Before beginning the conversion procedure, ensure that all IP Trunk 3.0x
cards have received their IP address configuration data from the Active
Leader (Leader 0 or Leader 1) and are functioning in the role of Active
Leader, Backup Leader, or Follower.

Convert the IP Trunk cards

Follow the steps in
Gateway Media Cards" (page 516)
Gateway Media Cards.
Procedure 72
Converting IP Trunk card to Voice Gateway Media Cards
Step
1
2
3
4
5
6
7
8
Copyright © 2003–2008, Nortel Networks
.
Procedure 72 "Converting IP Trunk card to Voice
Action
Obtain the CS 1000 Release 5.0 IP Line software (IPL500xx.p2 and
IPL500xx.sa). Place the Signaling Server Installation CD in the drive
of the TM Server, or use FTP to obtain the IP Line software from
the Signaling Server.
Use the TM 3.1 ITG ISDN Trunk service to select the node, or to
select all cards in the node of the same host type (Media Card or
ITG-P).
Right-click and select Configuration > Synchronize > Transmit.
Click the appropriate radio buttons for selected node or selected
cards, and for the card software.
Click Browse and locate the IP Line loadware file for the appropriate
card type (Media Card or ITG-P).
Click Open > Start Transmit.
Monitor the progress in the Transmit Control window to ensure that
the IP Line loadware is transmitted successfully to all selected cards.
At the Call Server CLI, use the LD 32 DISI command to disable
each IP Trunk card that is being converted.
In the TM 3.1 ITG ISDN Trunk service, double-click on each disabled
card that is being converted. Click the Reset button for each card.
Verify the firmware version of each Media Card and ITG-P 24-port
card.
In TM 3.1 ITG ISDN Trunk service, Telnet to each card and log into
the IPL> shell. Check the firmware version by entering the following:
IPL>firmwareVersionShow
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
to convert the IP Trunk cards to Voice