Node - Avaya Nortel Communication Server 1000 Manual

32
33
34
Delete a Follower Voice Gateway Media Card from the node
To delete a Voice Gateway Media Card from the node, follow the steps in
Procedure 51 "Deleting a follower Voice Gateway Media Card from the
node" (page
Procedure 51
Deleting a follower Voice Gateway Media Card from the node
Step
1
2
3
4
5
Copyright © 2003–2008, Nortel Networks
.
The pbxLinkShow command can also be entered at the IPL > or
oam> command line. Telnet to each Voice Gateway Media Card and
log in. Enter the pbxLinkShow command at the IPL > or oam>
prompt. Alternatively, look at the display on the card faceplate and
ensure it is not displaying an alarm.
In the Group drop-down list of the General Commands window,
select Misc.
In the Command drop-down list, select cardRoleShow and click
RUN.
If the card role is not Follower as expected, Telnet to the card IPL
> or oam> CLI and enter the clearLeader command to remove
the clearLeader flag.
Verify the card software and firmware version on the new card
and, if necessary, upgrade the software and the firmware. Use the
procedures outlined in the section
Media Card software and IP Phone firmware" (page
397).
Action
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards .
The Node Configuration window appears.
Click the Edit button for the node containing the Voice Gateway
Media Card to be deleted.
The Edit window appears.
Expand the Cards section by clicking the plus sign (+) to the left of
Cards.
Confirm the card to be deleted and then click the Remove button
for that card.
Confirm the deletion by clicking OK.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Update IP Telephony node properties 397
"Upgrade the Voice Gateway
—End—
307).