Avaya Nortel Communication Server 1000 Manual page 114

114 Features
•
•
•
Figure 26 "uftpShow command output" (page 114)
from the uftpShow command.
Figure 26
uftpShow command output
uftpRunTimeDataReset
The uftpRunTimeDataReset command is used to reset the run time
data field in the UFTP data block.
Figure 27 "uftpRunTimeDataReset command output" (page 115)
example of output from the uftpRunTimeDataReset command.
Copyright © 2003–2008, Nortel Networks
.
count of successful downloads because the Signaling Server/Voice
Gateway Media Card reboot
count of downloads that failed or prematurely ended because the
Signaling Server/Voice Gateway Media Card reboot
number of active downloads, and a list of each, including:
— type of IP Phone
— IP addresses of the IP Phones that downloaded firmware
— number of bytes downloaded
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
is an example of output
is an