Avaya Nortel Communication Server 1000 Manual page 23

Table 1
Possible system configurations
System
CS 1000E
CS 1000M
CS 1000 systems
CS 1000 systems have a Signaling Server in their network configuration.
The Signaling Server is a server that provides signaling interfaces to the
IP network. The Signaling Server central processor drives the signaling for
IP Phones and IP Peer networking.
In IP Line, the LTPS executes on the Signaling Server, and the voice
gateway executes on the Voice Gateway Media Cards. All IP Phones
register with the Signaling Server. The Voice Gateway Media Cards only
provide access to the voice gateway.
The Signaling Server is the node leader and, by default, acts as a Master
for the node.
Signaling Servers
The following Signaling Servers are available for CS 1000 Release 5.0:
•
•
•
•
For further information about Signaling Server hardware platforms, see
Signaling Server Installation and Commissioning (NN43001-312).
In a CS 1000 system, the Signaling Servers can be used in Leader/Follower
and Primary/Alternate/Failsafe combinations.
In CS 1000 Release 5.5, the Signaling Servers support the following
applications:
•
•
•
•
•
•
Copyright © 2003–2008, Nortel Networks
.
ISP1100
HP-DL320-G4
IBM-X306m
Common Processor Pentium Mobile (CP PM)
Line Terminal Proxy Server (LTPS)
Virtual Trunk
H.323 Gateway
SIP Gateway
SIP Redirect Server
Network Routing Service (NRS)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
System configurations 23
Signaling Server present
Yes
Yes