Avaya Nortel Communication Server 1000 Manual page 296

296 Configuration of IP Telephony nodes using Element Manager
2
Configure loss and level plan
The loss and level plan determines parameters, such as transmission gain,
that vary from country to country.
Dynamic Loss Plan
A Dynamic Loss Plan has been implemented to define the gateway loss
value per endpoint connection type. The loss plan adjusts the Voice
Gateway Media Card gateway channel loss for each call by sending pad
values to the card. Loss plan values are now configured through LD 73.
Copyright © 2003–2008, Nortel Networks
.
Figure 70
Firmware configuration
Specify the parameters needed to connect to the file server:
a. Firmware download server IP address: Enter the IP address
of the file server where the firmware is downloaded.
b. Firmware file path: Enter the path for the location of the
firmware files.
c. User ID: Enter the User ID that is required to access the file
server.
d. Password: Enter the Password that is required to access the
file server.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—