Ip Line Cli Commands - Avaya Nortel Communication Server 1000 Manual

This format applies only for IP Phone Virtual TNs.
If the IP Phone is not registered with the Call Server, an NPR0048 message
is generated. If the IP Phone is registered but idle, the system prints the
IP Phone IP address and Voice Gateway Media Card IP address and
generates an NPR0053 message. As well, if the IP Phone is registered, but
the Call Server is not responding, an NPR0503 message is generated.

IP Line CLI commands

IP Line CLI commands are designed to supplement Overlay commands and
to introduce features specific to the ITG-P 24-port card, Media Cards, and
Signaling Server platform.
All the CLI commands are supported on the ITG-P 24-port card and
Media Cards. The CLI commands are also available on the Signaling
Server if an "X" is shown in the Signaling Server column of the table.
For more information about commands, see Software Input Output
Reference—Maintenance (NN43001-711).
The IP Line CLI commands are accessed by connecting a TTY to the MAINT
port on the Voice Gateway Media Card faceplate. Alternatively, use Telnet
to access the CLI. These IP Line CLI commands are entered at the IPL>
prompt or oam> prompt. Instructions for connecting to the maintenance port
of the Signaling Server are described in Communication Server 1000M and
Meridian 1 Small System Installation and Commissioning (NN43011-310).
The commands are grouped into the following categories:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Copyright © 2003–2008, Nortel Networks
.
Table 128 "General purpose commands" (page 456)
Table 129 "File Transfer commands" (page 459)
"Configuration commands" (page 462)
Table 131 "Reset commands" (page 463)
Table 132 "DSP commands" (page 464)
Table 133 "Upgrade commands" (page 465)
Table 134 "IPL shell command" (page 465)
Table 135 "IP Phone Installer Password commands" (page 466)
Table 136 "Voice Gateway commands" (page 468)
Table 137 "Data Path Capture Tool commands" (page 469)
Table 138 "Translation IP/DN commands" (page 470)
Table 139 "Graceful Disable commands" (page 474)
Table 140 "IP Phone Loss Plan commands" (page 475)
Table 141 "Patch commands" (page 477)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
IP Line CLI commands 455