Add The Converted Cards To An Ip Telephony Node - Avaya Nortel Communication Server 1000 Manual

9

Add the converted cards to an IP Telephony node

Before adding the converted cards to an IP Telephony node, ensure the
following:
•
•
•
•
•
•
•
Choose one of the following methods:
1.
2.
Manually add converted Voice Gateway Media Cards to the existing
IP Telephony node
Follow the steps in
Media Cards into an existing IP Telephony node" (page 518)
converted Voice Gateway Media Cards to an existing IP Telephony node
using Element Manager.
Copyright © 2003–2008, Nortel Networks
.
If part of the IP trunk node is being retained, then the IP Trunk cards
that are being converted must be deleted from the existing IP Trunk
node in TM. The IP Trunk node properties must be transmitted from
TM to the Leader of the IP Trunk node.
If none of the IP Trunk node is being retained, delete the node in
TM 3.1.
the Signaling Server is functioning properly
the ELAN and TLAN network interfaces are properly configured
the Signaling Server is configured as the Leader in the node
the Call Server software is upgraded to CS 1000 Release 5.0 software
all unused IP Trunk TNs have been removed from the Call Server
database
all IP Trunk cards have been converted to Voice Gateway Media Cards
(upgraded to the IP Line application)
a PC is connected to the LAN
"Manually add converted Voice Gateway Media Cards to the existing
IP Telephony node" (page
"Import all converted Voice Gateway Media Cards into a new IP
Telephony node" (page
has been converted and the converted Voice Gateway Media Cards do
not have to be added to a larger existing node.
Procedure 73 "Adding the converted Voice Gateway
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Add the converted cards to an IP Telephony node 517
—End—
517).
520). Use this method if the entire IP Trunk node
to add the