Contents; Introduction; Ntmf94Ea I/O Cable - Avaya Nortel Communication Server 1000 Manual

Appendix B
I/O, maintenance, and extender cable
description

Contents

This section contains the following topics:
•
•
•
•
•
•

Introduction

This appendix describes the NTMF94EA, NTAG81CA, and NTAG81BA
cables and explains how to replace the NT8D81BA backplane ribbon cable
and install the NTCW84JA filter, if required.

NTMF94EA I/O cable

The NTMF94EA cable provides the ELAN and TLAN network interfaces
from the Voice Gateway Media Card to the customer network equipment.
This cable also has one DB9 serial port that provides serial connection
between the card and the customer PC or TTY. See
ELAN, TLAN and RS-232 serial maintenance I/O cable" (page
It is important to use the mounting screw provided to secure the top of the
NTMF94EA cable 25-pair Amphenol connector to the system. The screw
ties the LAN cable shield to the CS 1000 frame ground for EMC compliance.
Copyright © 2003–2008, Nortel Networks
.
"Introduction" (page 531)
"NTMF94EA I/O cable" (page 531)
"Connector pin assignments" (page 532)
"NTAG81CA maintenance cable description" (page 535)
"NTAG81BA maintenance extender cable" (page 536)
"Replace the NT8D81BA cable with the NT8D1AA cable and install the
NTCW84JW special IPE filter" (page 537)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Figure 108 "NTMF94EA
532).
531