Avaya Nortel Communication Server 1000 Manual page 440

440 Voice Gateway Media Card maintenance
If the IXP encounters any failures during its initialization, an H:XX error code
is displayed.
(page 440)
Table 120
List of error codes for the Media Card 32-port card
Code
H:00
H:01
H:02
H:04
H:08
H:20
H:40
H:80
When the Media Card 32S card boots, diagnostic information, such as boot
status, is displayed on the faceplate.
Table 121
Media Card 32 card diagnostic information
Message
BOOT
Copyright © 2003–2008, Nortel Networks
.
Normal code Fault code
T:14
T:15
T:16
T:17
T:18
T:19
T:20
T:21
T:22
Table 120 "List of error codes for the Media Card 32-port card"
shows the list of error codes.
Description
Host Processor not booting
SDRAM test failure
SRAM test failure
PC Card device failure
Network interface failure
DSP interface failure
NVRAM/EEPROM interface failure
PCM connector failure
Description
Appears when the display becomes active.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Message
F:14 Booting Host processor, waiting for
response with selftest information
F:15 Not used at present
F:16 Not used at present
F:17 Not used at present
F:18 Not used at present
F:19 Not used at present
F:20 Waiting for application start-up
message from Host processor
F:21 CardLAN enabled, waiting for request
configuration message
F:22 CardLAN operational, A07 enabled,
display now under host control