Avaya Nortel Communication Server 1000 Manual page 519

7
8
9
10
Copyright © 2003–2008, Nortel Networks
.
Add the converted cards to an IP Telephony node 519
Table 147
Example of card properties data
ELAN IP address
ELAN MAC address
TLAN IP address
TLAN gateway IP address
Hostname
Card TN
Card Processor Type
H.323 ID
Enable set TPS
System name
System location
System contact
Repeat the previous step for each card that is to be added to the
node.
When the card property data has been entered for all the cards, click
the Save and Transfer button.
This action saves the configuration changes to the Call Server and
transfers the changes to the Signaling Servers and Voice Gateway
Media Cards in the node. The BOOTP and CONFIG.INI files are
saved on the Call Server and transferred to the Signaling Server
Leader. The BOOTP table is updated so that the converted cards
can receive their IP address configuration.
The Transfer Progress window appears.
It might be necessary to press the Reset button on the faceplate
of the converted cards to trigger a new BOOTP request. Do not
continue with this procedure until all converted cards have received
their IP addresses.
Click the Transfer to Failed Elements button to transfer the
bootp.tab and CONFIG.INI files to the converted cards.
Configure the new Voice Gateway TNs on the Call Server using one
of the following methods:
a. Use LD 14 from the Call Server CLI to configure the new Voice
Gateway TNs.
or
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
47.11.215.115
00:60:38:bd:fe:80
47.11.215.234
47.11.215.1
9
Media Card
check mark
MGC1
BWM system 1
John Smith