Avaya Nortel Communication Server 1000 Manual page 231

6
7
8
Copyright © 2003–2008, Nortel Networks
.
a. Manually add an IP Telephony node. See
Telephony node" (page
b. Configure SNMP traps and community strings access for
security. See "Configuring SNMP trap destinations and
community strings" (page
c. Configure DiffServ CodePoint (DSCP) data, 802.1Q support,
and NAT support. See
d. Configure Call Server ELAN network interface (Active ELNK)
IP address, TLAN Voice port (RTP UDP port), and the routing
tables on the Voice Gateway Media Card. See
IP address, TLAN voice port, and routes" (page
e. Configure file server access. See
(page 295).
f. Configure the loss plan. See
(page 296).
g. Configure Voice Gateway Media Card properties. See
and configure the card properties of the Voice Gateway Media
Card" (page 298).
Submit and transfer the node information to the Call Server. See
"Submit and transfer the node information" (page
Transmit Voice Gateway Media Card configuration data to the Voice
Gateway Media Cards:
a. Set Leader IP Address. See
Leader IP address for a second or subsequent node" (page
b. Transmit node and card properties to the Leader. See
34 "Transmitting node properties to Leader" (page
Upgrade the card software and IP Phone firmware:
a. Verify card software version. See
Media Card software version" (page
b. Verify card firmware release. See Determine the IP Phone
firmware version.
c. Download software and firmware files from the Nortel Web site.
See "Download the current loadware and IP Phone firmware"
(page 309)
d. Upload the software and firmware files to the file server. See
"Upload the loadware and firmware files to the Signaling Server"
(page 310).
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Installation summary 231
"Manually add an IP
280).
283).
"Configure Quality of Service" (page
"Configure file server access"
"Configure loss and level plan"
Procedure 33 "Configuring the
"Determine Voice Gateway
309).
289).
"Configure ELAN
291).
"Add card
299).
302).
Procedure
304).