Procedure 11 Preinstallation And Configuration Steps - Avaya Nortel Communication Server 1000 Manual

230 Installation and configuration summary
Procedure 11
Preinstallation and configuration steps
Step
1
2
3
4
5
Copyright © 2003–2008, Nortel Networks
.
Action
Complete the Voice Gateway Media Card installation summary
sheet. See Table 70 "Voice Gateway Media Card installation
summary sheet" (page
Complete the IP Phone configuration data summary sheet. See
Table 71 "IP Phone configuration data summary sheet" (page
Install the hardware components:
a. Install the Voice Gateway Media Card. See
"Installing the ITG-P 24-port line card" (page 239)
the ITG-P 24-port line cards and
Media Card" (page 242)
cards.
b. Cable the Voice Gateway Media Cards:
1. Install the ELAN subnet, TLAN subnet, serial interface cable
for the ITG-P 24-port line card. See
the NTMF94EA ELAN, TLAN, serial interface cable" (page
248).
2. Install the Shielded 50-pin to Serial/ELAN/TLAN Adapter for
the Media Card 32-port cards. See
the Shielded 50-pin to Serial/ELAN/TLAN Adapter onto the
Media Card" (page
Configure IP Line data on the system:
a. Configure the IP address for the ELAN network interface. See
Procedure 18 "Configuring the ELAN network interface IP
address for the active ELNK" (page
b. Configure VoIP bandwidth management zones. See
VoIP bandwidth management zones (LD 117)" (page
c. Configure IP Line physical TNs. See
(LD 14)" (page 256).
d. Configure virtual superloops. See
for IP Phones" (page
e. For information about mapping virtual superloops on a Small
System, see "Small Systems" (page
f. Configure IP Phone features. See
in LD 11" (page 261).
Configure IP Line data using Element Manager:
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
233).
Procedure 14 "Installing the
for installing the Media Card 32-port
Procedure 16 "Installing
Procedure 17 "Installing
250).
252).
"Configure physical TNs
"Configure virtual superloops
259).
259).
"Configure IP Phone features
234).
Procedure 12
for installing
"Configure
253).