Accessing Uftpautoupgradetimeoutset Command - Avaya Nortel Communication Server 1000 Manual

108 Features
3
4
5
6
7
uftpAutoUpgradeTimeoutSet
The uftpAutoUpgradeTimeoutSet command sets the idle timer for starting
the firmware download. To access the uftpAutoUpgradeTimeoutSet
command using Element Manager, follow
uftpAutoUpgradeTimeoutSet command" (page
Procedure 5

Accessing uftpAutoUpgradeTimeoutSet command

Step
1
Copyright © 2003–2008, Nortel Networks
.
Click the GEN CMD button for the desired Signaling Server.
The General Commands window appears. See
Commands window" (page
From the Group drop-down list, select uftp.
From the Command drop-down list, select uftpTurboModeTime-
outSet. See Figure 21 "uftpTurboModeTimeoutSet window" (page
108).
This command accepts the MM parameter.
Figure 21
uftpTurboModeTimeoutSet window
Enter the time in minutes in the Timeout In text box.
Click Run.
The command output is displayed in the pane below the command.
Action
In the navigator, select IP Network > Maintenance and Reports.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
105).
—End—
Procedure 5 "Accessing
108).
Figure 18 "General