Avaya Nortel Communication Server 1000 Manual page 172

172 Features
Command
ECNT MODL
<MMMM>
ECNT PEC <PEC>
Error messages are printed when invalid data is entered for these
commands. The messages include valuable information such as the correct
ranges for the command parameters. See the following tables for the error
messages:
•
•
•
•
Table 51
ECNT Card command error messages
Error
Slot out of range error
Slot non-virtual loop error
Slot not configured loop error
Customer out of range error
Customer not configured error
Combination of invalid slot and
invalid customer
Copyright © 2003–2008, Nortel Networks
.
Description
Prints the number of IP Phones of specified model.
<MMMM> – specifies model name.
If this parameter is omitted, then a list of the model names and
associated mnemonics is printed.
Prints the number of IP Phones with specified PEC, where:
<PEC> – Product Engineering Code
ECNT PEC is equivalent to ECNT PEC ALL; that is, the list containing
the PECs and the quantity of IP Phones with this PEC is printed.
Table 51 "ECNT Card command error messages" (page
Table 52 "ECNT Zone command error messages" (page
Table 53 "ECNT Node command error messages" (page
Table 54 "ECNT SS command error message" (page
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Error Message
Slot out of range. Range: [61 to 99]
Slot does not correspond to a virtual loop.
Slot corresponds to a virtual loop but it is
not configured.
Customer out of range. Range: [0 to 31]
Customer does not exist.
Slot does not correspond to a virtual loop.
Customer out of range. Range: [0 to 31]
172).
173).
173).
173).