Avaya Nortel Communication Server 1000 Manual page 469

command isetNATShow. Then enter vgwShow using the Public IP address
and Public Media Port. An example of the output is shown in
"vgwShow sample with Public information" (page
Figure 105
vgwShow sample with Public information
Data Path Capture Tool commands
Table 137 "Data Path Capture Tool commands" (page 469)
commands used with the Data Path Capture Tool.
For more information about Data Path Capture Tool commands, see
Software Input Output Reference—Maintenance (NN43001-711).
Table 137
Data Path Capture Tool commands
IPL> command
captureStart
captureStop
captureSaveLocal
Copyright © 2003–2008, Nortel Networks
.
Description
Begins the capture operation. When the
command is entered, data for the gateway
channel <tcid> (0 to 23 for ITG-P 24-port
card and 0 to 31 for Media Cards) begins
to be captured to the circular queue.
This command does not appear on the MC
32S card.
Stops the audio data capture.
This command does not appear on the MC
32S card.
Dumps the contents of the circular queue
to the specified file on the memory PC
Card inserted in the /A: drive on the Voice
Gateway Media Card faceplate.
This command does not appear on the MC
32S card.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
IP Line CLI commands 469
Figure 105
469).
lists the
Signaling
Server