Change The Login Banner - Avaya Nortel Communication Server 1000 Manual

Change the login banner

You can change the logon banner in Element Manager for CS 1000 Release
5.5.
Changing the Element Manger logon banner
Step
1
2
3
4
5
6
7
Summary of procedures
The following is the summary of the steps required to configure a node and
a Voice Gateway Media Card using Element Manager:
1.
2.
3.
4.
5.
Copyright © 2003–2008, Nortel Networks
.
period, the timer is reset. If the user does not respond, the session
is cancelled and the user is forced to logon again. Any data that was
modified, but not submitted, is lost.
Action
Logon to Element Manager with Level 2 or PDT 1 or PDT 2
privileges.
Navigate to Security > Login Options > Access Warning page.
Click Edit.
Change the banner information present in the text area.
Click Save.
The configuration saves on the Call Server to perform EDD,
which propagates the banner information changes to all elements
registered to the Call Server.
Click OK.
Log off and log on to Element Manager to display the Element
Manager login page with the updated banner information.
"Manually add an IP Telephony node" (page 280)
"Configuring SNMP trap destinations and community strings" (page 283)
"Configure Voice Gateway Profile data" (page 285)
"Configure Quality of Service" (page 289)
"Configure ELAN IP address, TLAN voice port, and routes" (page 291)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Configure IP Line data using Element Manager 279
—End—
—End—