Avaya Nortel Communication Server 1000 Manual page 329

4. IP Phone Installer Password
The SNMP community strings are configured for the entire system. IPL>
and oam> CLI Shell passwords and the Call Server Level 1 Password
(PWD1) operate at the card level. The IP Phone Installer Password works
at the node level.
•
•
•
•
SNMP community strings
SNMP community strings are required to access the Voice Gateway Media
Card.
Element Manager is used to configure the community strings for CS 1000
systems.
CLI Shell user name and password
The Command Line Interface (CLI) is password-protected to control Telnet
access and access to the local maintenance port. The same user name and
password also controls FTP access to the Voice Gateway Media Cards.
logon banner
The IP Line logon banner information includes the IP Line Voice Gateway
Media Card loadware version, ELAN network interface IP address, card
type, firmware version, current time and date, system name, system
location, and system contact.
The following information is an example of the logon banner displayed on
the Media Card:
Copyright © 2003–2008, Nortel Networks
.
The SNMP community strings are configured centrally on the Call
Server and synchronized to all devices, including the Voice Gateway
Media Cards.
The IPL> and oam> CLI Shell password is synchronized with the PWD1.
The Level 1 Passwords (PWD1) is set at the Call Server and is sent to
all Voice Gateway Media Cards in the node.
The IP Phone Installer Password is first applied to one Voice Gateway
Media Card in the node, and then is applied to all the Voice Gateway
Media Cards in the node.
logon:
Password
Welcome to the IP Line command line.
Software Version: IPL-5.00.01
Management IP: 47.11.216.216
Host Type: Media Card
Firmware Version: ITG Firmware Rls 5.7
SysName: ITG Line
SysLocation: TN 10 0
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Password security 329