Avaya Nortel Communication Server 1000 Manual page 173

Ip line fundamentals
Hide thumbs Also See for Nortel Communication Server 1000:
Table of Contents

Advertisement

Table 52
ECNT Zone command error messages
Error
Zone out of range error
Zone not configured error
Customer out of range error
Customer not configured error
Combination of invalid zone and
invalid customer error
Table 53
ECNT Node command error messages
Error
Node out of range error
Node not configured error
Table 54
ECNT SS command error message
Error
SS not found in system error
IP Phone Zone Traffic Report 16
A system traffic report, IP Phone Zone Traffic Report 16 in LD 2 is created
on the system to print IP Phone data at the zone level. The data is printed
for the following categories at the end of each collection period on a
per-zone basis:
The counters are reset after the data is printed.
Copyright © 2003–2008, Nortel Networks
.
Total inter/intra-zone calls made
Total inter/intra zone calls blocked
Percent average inter/intra zone bandwidth used
Percent maximum inter/intra zone bandwidth used
Total inter/intra zone bandwidth threshold exceeded count
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Call Statistics collection 173
Error Message
Zone out of range. Range: [0 to 255]
Zone not configured.
Customer out of range. Range: [0 to 31]
Customer does not exist.
Zone not configured.
Customer out of range. Range: [0 to 31]
Error Message
Node out of range. Range: [0 to 9999]
Node not registered.
Error Message
Signaling Server <name> does not exist.

Advertisement

Table of Contents
loading

Table of Contents