Avaya Nortel Communication Server 1000 Manual page 395

14
15
16
17
18
19
Copyright © 2003–2008, Nortel Networks
.
•
If the transfer is successful for a card, the Status column displays
"Complete".
• If the transfer is unsuccessful, the Status column displays "Fail".
Insert the new card.
The card boots and obtains its IP configuration from the node
master. This process takes several minutes.
The Maintenance faceplate display shows an alarm of T:21 or S009.
• T:21 is displayed if the card is new and there is no CONFIG.INI
file.
• S009 is displayed if the card has been used before and has a
CONFIG.INI file that contains an IP address for the Call Server
that is no longer correct.
In the Element Manager navigator, click IP Network > Maintenance
and Reports.
The Node Maintenance and Reports window appears.
Expand the node containing the Voice Gateway Media Card by
clicking the plus sign (+) to the left of the Node ID.
Click the GEN CMD button associated with the Voice Gateway
Media Card. See Figure 92 "Voice Gateway Media Card and GEN
CMD button" (page 395).
Figure 92
Voice Gateway Media Card and GEN CMD button
The General Commands window appears.
From the Group drop-down list, select Misc.
From the Command drop-down list, click the cardRoleShow
command.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Update IP Telephony node properties 395