Nortel Communication Server - Avaya Nortel Communication Server 1000 Manual

2
3
4
5
Copyright © 2003–2008, Nortel Networks
.
Expand the node to show all its elements.
Click the GEN CMD button associated with the Voice Gateway
Media Card.
The General Commands windows opens.
From the Group drop-down list, select NodePwd.
From the Command drop-down list, select nodePwdShow and
click the RUN button.
The output of the nodePwdShow command is displayed in the text
area at the bottom of the window. If in the default state, the IP Phone
Installer Password has never been set. The nodePwdShow output
displays the following:
NodeID PwdEna
====== ======= ======== ======== ======= ===========
123 No
0h 0m 0s
where
NodeID – the IP Phone Installer Password configuration applies
to all Voice Gateway Media Cards on the same TLAN subnet that
belong to this Node ID.
PwdEna – by default the cards should be in disabled state
(PwdEna=No). The PwdEna setting specifies the enabled (Yes) or
disabled (No) state of the IP Phone Installer Password.
Pwd – this is the administrator IP Phone Installer Password. In
the default state, the administrator password is null.
TmpPwd – this is the temporary IP Phone Installer Password. In
the default state, the temporary password is null.
Uses – the Uses parameter applies to the temporary IP Phone
Installer Password. In the default state, this setting is null. If the
card is not in the default state, the Uses parameter is a numeric
value from 0 – 1000. This number specifies the remaining number
of uses for the temporary password. If zero is entered for the
Uses parameter when setting the temporary password, the Time
parameter is mandatory. When the Time parameter is in effect,
the password expiration is based on time instead of the number
of uses.
Timeout – the Timeout heading corresponds to the Timeout
parameter of the temporary IP Phone Installer Password. In the
default state the Timeout is null. If the card is not in the default
state, this setting specifies the duration in hours in which the
temporary password is valid. The range is 0 – 240 hours (which
is a maximum of 10 days). The number specified under Timeout
indicates the remaining time to expire of the temporary password.

Nortel Communication Server 1000

IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Setting the IP Phone Installer Password 413
Pwd TmpPwd Uses Timeout
0 0d