Avaya Nortel Communication Server 1000 Manual page 458

458 Voice Gateway Media Card maintenance
Command
logFileOn
logFileOff
logShow
logConsoleOn
logConsoleOff
isetShow
isetShowByTN
isetShowByIP
pbxLinkShow
itgAlarmTest
itsAlarmTest
itgPLThreshold
elmShow
itgChanStateShow
File transfer commands
Table 129 "File Transfer commands" (page 459)
commands.
Copyright © 2003–2008, Nortel Networks
.
Description
Turns on error logging to the syslog file.
This command does not appear on the MC 32S card.
Turns off error logging to the syslog file.
This command does not appear on the MC 32S card.
Displays information about the current logging
configuration. Indicates whether logging is on or off.
Turns on error logging to the console.
Turns off error logging to the console.
Displays general information for all registered IP
Phones. For example, the command displays the IP
address of the IP Phone, the VTN that the IP Phone
is associated with, indicates the type of IP Phone
such as IP Phone 2001, IP Phone 2002, and IP
Phone 2004, or IP Softphone 2050, IP Phone 1110,
IP Audio Conference Phone 2033, IP Phone 2007,
IP Phone 1120E, IP Phone 1140E, IP Phone 1150E
and provides the type of registration and the new
registration status.
Displays general information about all registered IP
Phones, sorted by TN.
Displays general information about all registered IP
Phones, sorted by IP address.
Displays information about the link to the CPU,
including the configuration and link status.
Generates ITGxxxx test alarms.
This command does not appear on the MC 32S card.
Generates ITSxxxx test alarms.
Sets the IP Phone and gateway alarm packet loss
threshold (units 0.1%). An alarm is generated when
the threshold is reached.
Displays a list of supported languages.
Displays the state for channels; for example, if they
are idle or busy.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
X
X
X
X
lists the file transfer