Transfer Files Using The Cli - Avaya Nortel Communication Server 1000 Manual

350 IP Line administration
•
Transfer files using the CLI
A number of special file transfer commands are available to Put/Get files
from the IPL> CLI or oam> CLI. These commands are normally used as part
of an expert support procedure if TM or Element Manager is not available.
These commands, listed in
the perspective of the Voice Gateway Media Card. If Get is part of the
command, the file is transferred from the TM PC to the Voice Gateway
Media Card. If Put is part of the command, the file is transferred from the
Voice Gateway Media Card to the external FTP Server.
These commands, list in are from the perspective of the MC 32S card.
To transfer a file, enter one of the commands listed in
transfer" (page 350)
32S card" (page 351)
transfer is to occur.
Table 91 " File transfer" (page 350)
entered at the IPL> CLI.
351)
Table 91
File transfer
Command
swDownload
configFileGet
bootPFileGet
Copyright © 2003–2008, Nortel Networks
.
monitored and logged independently. This command is not available
on the MC 32S card.
— A value of zero (0) disables packet loss logging.
— A value of one (1 – default) logs a message if packet loss
during the course of the call exceeds the threshold set with the
itgPLThreshold command.
— A value of two (2) indicates that log messages are printed as packet
loss is detected during the call. A message is printed each time
packet loss is detected indicating how many packets where lost at
that moment.
itgPLThreshold xxx – this command sets the packet loss logging
and alarm threshold, where xxx is a number between 1 and 1000, and
represents the threshold in 0.1% increments. Packet loss which exceeds
the threshold generates an SNMP trap and writes a message to the log
file if logging is enabled. The default value is 10 (1%).
at the IPL> CLI or
at the oam> prompt, depending on what type of file
lists the commands, which can be entered at the oam> prompt.
Parameters
<hostname> <username> <password> <directory path> <file name>
<hostname> <username> <password> <directory path> <file name>
<hostname> <username> <password> <directory path> <file name>
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Table 91 " File transfer" (page
Table 92 "File transfer for the MC
lists the commands, which can be
Table 92 "File transfer for the MC 32S card" (page
350), are from
Table 91 " File