284 Configuration of IP Telephony nodes using Element Manager
Procedure 25
Configuring SNMP trap destinations
Step
1
2
3
4
Copyright © 2003–2008, Nortel Networks
.
Action
In the Element Manager navigator, click System > Alarms > SNMP.
The SNMP Configuration window appears. See
configuration window" (page
Figure 63
SNMP configuration window
In theTrap Source section, enter the following parameters:
•
Navigation Site Name
•
Navigation System Name
These parameters are used during trap generation.
In the MIB-2 System Group Parameters section, enter the
appropriate parameters from the system administrator:
•
System Contact
•
System Location-
•
System Name
In the Community section, enter the following parameters for system
management community strings for access to the Management
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
284).
Figure 63 " SNMP