Upgrading The Software - Avaya Nortel Communication Server 1000 Manual

562 Appendix F Moving Voice Gateway Media Cards between systems
11

Upgrading the software

Use
Media Card running CS 1000 Release 4.0 or e" (page 562)
software on the ITG-P 24-port card or the Media Card running Succession
Release 3.0, or CS 1000 Release 4.0.
Procedure 86
Upgrading the software for the ITG-P 24-port card or the Media Card running
CS 1000 Release 4.0 or earlier
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
Click Transfer to Selected Elements to transfer the config.ini and
bootp.tab files to the card.
See "Transmit node properties" (page
Procedure 86 "Upgrading the software for the ITG-P 24-port card or the
Action
Access the IPL> prompt using the following default user name and
password for CS 1000 Release 4.0 and lower: itgadmin, itgadmin
If you have an ITG-P 24-port card, enter
IPL>upgradeErase
This command erases the application binaries from the ITG-P
24-port card Flash memory.
To initiate software download, enter
IPL>swDownload
where
srvrIP FTP server IP address
uid, passwrd used to log on to the server
path, fname path and name of the file on the server to retrieve
The swDownload command downloads the IPL application binary
from the specified FTP server. The command is only applicable to
Voice Gateway Media Cards. The command is executed from the IPL
VXWorks, and BIOS CLIs. If the loadware resides locally on the card
(for example, on a flash card in /A: drive), use the swCopy command
instead. The syntax is : swCopy "/path/and/name/of/loadware/file"
Drive letters must be uppercase and file names must be lowercase. All
files must follow the 8.3 format.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
304).
—End—
ATTENTION
to upgrade the