Procedure 32 Submitting And Transferring The Node Information - Avaya Nortel Communication Server 1000 Manual

300 Configuration of IP Telephony nodes using Element Manager
Procedure 32
Submitting and transferring the node information
Step
1
2
3
4
Copyright © 2003–2008, Nortel Networks
.
Action
Click Save and Transfer when all the node information is configured
in the Edit window.
Clicking Save and Transfer saves and transfers the data to the Call
Server and to all the node elements.
There is a Save and Transfer button at both the top and bottom
of the Edit window.
The Edit window closes, and the Node Configuration window
appears with the new node added. Save and Transfer can be
clicked after each section is configured in the Edit window. However,
each time Save and Transfer is clicked, the Edit window closes and
the Node Configuration window is displayed. To continue the node
configuration, click the Edit button to return to the Edit window.
If Cancel is clicked, all information that has been configured is
discarded. The Edit window closes and the Node Configuration
window appears.
Click the Transfer/Status button for the node.
The Transfer confirmation dialog box opens.
Click OK to confirm the transfer.
After a few seconds, the Transfer Progress window appears and
displays each of the Voice Gateway Media Cards in the node.
The Voice Gateway Media Cards retrieve the CONFIG.INI and
BOOTP.TAB files from the Call Server. A check mark is added to
each field as the card receives its CONFIG.INI and BOOTP.TAB files.
When the transfer is complete, click OK in the Transfer Successful
dialog box.
•
If the transfer is successful for a card, the Status column displays
"Complete" and a check mark is displayed.
• If the transfer is unsuccessful, the Status column displays "Fail".
A failed transfer can be caused by several situations, including
the following:
— improper cabling. Check cable connections.
— improper card configuration. Ensure all information is
configured correctly.
— the Voice Gateway Media Card running an older version of
the software than the Signaling Server. Verify the software
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008