Element Manager Support - Avaya Nortel Communication Server 1000 Manual

keys using the Shift key functionality with one Expansion Module. If more
than one Expansion Module is connected, the Shift key functionality does
not affect the Expansion Modules.
The IP Phone 1120E does not support Shift key functionality.
The Expansion Module has the following display characteristics:
•
•
•
The Expansion Module must be configured in LD 11 before it can be used.
For further information about the Expansion Module, see Expansion Module
for IP Phone 1100 Series User Guide (NN43130-101) and IP Phones
Fundamentals (NN43001-368).

Element Manager support

Element Manager enables configuration of IP Line using a Web browser
on CS 1000 systems.
Each Signaling Server hosts a Web server, Element Manager, that allows
configuration, administration, and maintenance to be performed on the
system components. Element Manager is a graphical Web interface that
provides an alternative to the traditional CLI and overlays. The interface
is available to users running a Web browser on a PC. No special client
software is required.
The Element Manager Web server runs on each Signaling Server and the
Signaling Server acts as a file server.
After a Web browser is opened and the IP address of the Signaling Server
is entered, the Element Manager interface is displayed. Element Manager
is then used to perform tasks such as configuring an IP Telephony Node,
checking and uploading loadware and firmware files, and retrieving the
Copyright © 2003–2008, Nortel Networks
.
LCD display area—Each of the 18 physical keys on the Expansion
Module has a 10-character display label beside the 18 self-labeled
line/programmable feature keys. This label is set automatically, however,
the user can edit the label using the controls on the IP Phone.
adjustable display and contrast settings—Use the Contrast Adjustment
option under the Telephone Options menu on the IP Phone to adjust the
display and contrast settings. Any contrast changes you make on the
IP Phone affect the Expansion Module. The Expansion Module and IP
Phone do not have separate contrast adjustments.
backlight—Whether the IP Phone is powered using local power or
Power over Ethernet (PoE), the Expansion Module receives the same
backlight settings as the IP Phone. The backlight timer only turns off if
the backlight timer is set.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Element Manager support 167