Lamp Audit And Keep Alive Functions - Avaya Nortel Communication Server 1000 Manual

CLI Command
tpsARTraceSettings
tpsARTraceHelp

Lamp Audit and Keep Alive functions

The Lamp Audit function provides a continuous source of heartbeat
messages to ensure the IP Phone is powered and the IP connection is alive.
Because there is a reliable UDP connection from the core through to the IP
Phones, any failure of the IP Phone, the Voice Gateway Media Card, or the
IP connection is detected.
Network Signaling Diagnostics
Network Signaling Diagnostics can be run as part of the midnight routines
defined in LD 30. Fore more information, see Software Input Output
Reference—Maintenance (NN43001-711).
IP Phone Keep Alive
When the Voice Gateway Media Card detects that the IP Phone has been
disconnected, the Voice Gateway Media Card logs the event and sends an
UNREGISTER message to the system for that IP Phone.
Card or ELAN subnet failure
When the Call Server detects a loss of connection with the Voice Gateway
Media Card, the Call Server logs a message and unregisters all the IP
Phones and gateway channels associated with that Voice Gateway Media
Card.
Copyright © 2003–2008, Nortel Networks
.
Description
If the command is run from the OAM
prompt or PDT prompt on the Signaling
Server:
The values are the actual word, not a
number:
TTY
RPTLOG
FILE
TTY+FILE
• "File Pathname" is a string encapsulated
in quotes. It specifies the file to output to if
option 3 or 4 was selected.
Displays the trace tool settings, which
endpoints are being traced, and where the
trace output is being directed.
Displays a list of all CLIs used for tracing
tpsAR protocol messages, including usage
and parameters.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Lamp Audit and Keep Alive functions 483
Signaling
Server
X
X