Procedure 4 Accessing Uftpturbomodetimeoutset Command - Avaya Nortel Communication Server 1000 Manual

4
5
6
uftpTurboModeTimeoutSet
The uftpTurboModeTimeoutSet command sets the idle timer for Maintenance
Mode. To access the uftpTurboModeTimeoutSet command using Element
Manager, follow
command " (page
Procedure 4
Accessing uftpTurboModeTimeoutSet command
Step
1
2
Copyright © 2003–2008, Nortel Networks
.
Enhanced UNIStim Firmware Download for IP Phones 107
The General Commands window appears. See
Commands window" (page
From the Group drop-down list, select uftp.
From the Command drop-down list, select uftpTurboModeShow.
See Figure 20 "uftpTurboModeShow window in Element Manager"
(page 107).
Figure 20
uftpTurboModeShow window in Element Manager
The command output is displayed in the pane below the command.
Click Run.
Procedure 4 "Accessing uftpTurboModeTimeoutSet
107).
Action
In the navigator, select IP Network > Maintenance and Reports.
The Node Maintenance and Reports opens.
Click the plus sign (+) to the left of the Node ID of the desired node
to view the node elements.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
105).
—End—
Figure 18 "General