Avaya Nortel Communication Server 1000 Manual page 460

460 Voice Gateway Media Card maintenance
Command
bootPFileGet
"hostname",
"username",
"password",
"directory path",
"file name"
hostFileGet
"hostname",
"username",
"password",
"directory path",
"file name",
"ITGfile name",
listener
currOMFilePut
"hostname",
"username",
"password",
"directory path",
"file name"
Copyright © 2003–2008, Nortel Networks
.
Description
IPL> configFileGet "ngals042", "anonymous",
"guest", "/configDir", "config.ini"
Updates the BOOTPtab file on the Voice
Gateway Media Card with the BOOTPtab file
on the specified host, account and path. The
bootpFileGet task on the ITG host initiates an
FTP session with the given parameters and
downloads the file to flash file system.
Example:
IPL> bootPFileGet "ngals042", "anonymous",
"guest", "/bootpDir", "bootptab"
Transfers any file from an FTP Server to the
Voice Gateway Media Card. This command gets
any file from the host and does a Get using FTP
to the Voice Gateway Media Card.
ITGfile name is the full path AND file name
of where the file is to be placed. The listener
parameter indicates which module to inform of
the successful file transfer. It can be set to –1
to be disabled.
Example:
IPL> hostFileGet "ngals042", "anonymous",
"guest", "/hostfileDir", "hostFile.txt",
"/C:ITGFILRDIR/ITGFILE.TXT", -1
Sends the current Operational Measurements
(OM) file to the specified host.
The OMFilePut task on the ITG host initiates
an FTP session with the given parameters and
downloads the Voice Gateway Media Card
Operational Measurements file to the specified
location on the host.
Example:
IPL> currOMFilePut "ngals042", "anonymous",
"guest", "/currDir", "omFile"
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
X