System Error Messages - Avaya Nortel Communication Server 1000 Manual

POST
PASS
EXXX
LOAD
In normal operation, the messages appear in the following order:
•
•
•
•
If there is a self-test error, an error code is displayed.
The faceplate displays Leader or Follower, and the number of registered
IP Phones.
Table 122
Messages displayed on the LED during Media Card 32S card normal operation
Message
Exxx
Lxxx
Fxxx
Sxxx

System error messages

When an error or specific event occurs, SNMP agent on the Voice
Gateway Media Card sends an alarm trap to TM or any SNMP manager
that is configured in the SNMP Manager list in the ITG Card properties.
System error message are also written to the error log file containing error
messages.
View the error log in TM 3.1 IP Line by clicking the Open Log File button
on the Maintenance tab of the ITG Card Properties. Alternatively, view
the log file in any text browser after uploading it to an FTP host using the
LogFilePut command.
Copyright © 2003–2008, Nortel Networks
.
Power On Self Test (POST)
Displays while the Media Card 32S card carries out hardware
system tests during system power-up.
Displays when POST passes.
Displays if a serious system error is detected.
Error code where XXX is a numeric value.
Displays when application software loads.
BOOT
POST
PASS
LOAD
Description
E indicates an error code when a serious system error is detected, and xxx is
a numeric value.
L indicates the card is a Leader, and xxx is the number of registered IP
Phones.
F indicates the card is a Follower, and xxx is the number of registered IP
Phones.
S indicates a system link error code, and xxx is a numeric value.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
System error messages 441