Procedure 50 Adding A Voice Gateway Media Card To The Node - Avaya Nortel Communication Server 1000 Manual

392 IP Line administration using Element Manager
Add a Voice Gateway Media Card to the node
To add a Voice Gateway Media Card to the node, follow the steps in
Procedure 50 "Adding a Voice Gateway Media Card to the node" (page
Procedure 50
Adding a Voice Gateway Media Card to the node
Step
1
2
3
4
5
6
Copyright © 2003–2008, Nortel Networks
.
•
See the Maintenance chapter for the procedures to replace
a Voice Gateway Media Card. See
Gateway Media Card" (page
Action
Choose a card slot for the new card. Note the TN.
Configure IPTN in LD 14 at the Call Server.
Install the I/O cables for connection to the ELAN and TLAN network
interfaces on the selected card slot.
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards.
The Node Configuration window appears.
Click the Edit button for the node that is receiving the new Voice
Gateway Media Card.
The Edit window appears.
Click the Add button to the right of the Cards section.
The Card section expands. See
(page 393).
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
"Replace a Leader Voice
496).
—End—
Figure 91 "Add Card window "
392).