Dsp Peg Counter For Cs 1000E Systems; Enhanced Unistim Firmware Download For Ip Phones - Avaya Nortel Communication Server 1000 Manual

Click the Submit button after selecting one of these available parameters to
execute the command. The output from the command is displayed in the
text box located in the lower portion of the Web page.
Online Help describes the various parameters available for the STIP ACF
command.
isetShow command
If the ACF status exists for the requested IP Phone, it is provided in the
State field of the isetShow command output. The ACF status is separated
from the state by '-' (dash). The ACF status is any value described in the LD
80 output. The Call Server ACF timer value is not provided in the output.
See
Figure 10
isetShow command output with ACF example

DSP peg counter for CS 1000E systems

The conversion of TDM voice to IP packets is performed by Digital Signaling
Processor (DSP) resources residing on a Voice Gateway Media Card in the
IP Media Gateway (IPMG) of a CS 1000E system. The Voice Gateway
Media Cards have a limited number of DSP resources that actually perform
the conversion. When all DSP resources are busy, IP-to-TDM calls and
TDM-to-TDM calls between different IPMGs are blocked. IP-to-IP calls
are not blocked.
The DSP Peg Counter feature provides three counters. The first peg counter
provides a count of the number of attempts to allocate a DSP resource on
an IPMG. The second provides a count of the number of times calls were
blocked on an IPMG due to a lack of DSP resources. If the call failed due to
a lack of bandwidth, this is reflected in the third peg counter. The counters
are a part of customer traffic measurement in LD 2.
For more information, see Traffic Measurement: Formats and Output
Reference (NN43001-750) and Software Input Output Administration
(NN43001-611).

Enhanced UNIStim Firmware Download for IP Phones

Firmware files are stored on and are downloaded from the Signaling Server.
Copyright © 2003–2008, Nortel Networks
.
Enhanced UNIStim Firmware Download for IP Phones 81
Figure 10 "isetShow command output with ACF example" (page
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
81).