Avaya Nortel Communication Server 1000 Manual page 254

254 Installation and initial configuration of an IP Telephony node
Table 76
LD 117 bandwidth management zone configuration
Command
NEW ZONE xxx p1 p2 p3 p4 p5
New ZONE xxx
CHG ZONE xxx p1 p2 p3 p4 p5
OUT ZONE xxx
DIS ZONE xxx
ENL ZONE xxx
PRT ZONE xxx
PRT ZONE ALL
Element Manager for Zone Configuration
Optionally, zones can be configured for CS 1000 systems using Element
Manager instead of LD 117.
Copyright © 2003–2008, Nortel Networks
.
Description
Create a new zone, where:
xxx = zone number = (0) – 255.
p1 = Intrazone available bandwidth
= 0 – (10 000) – 10 0000 (kb/s)
p2 = Intrazone preferred strategy
= (BQ – Best Quality) or BB – Best Bandwidth
p3 = Interzone available bandwidth
= 0 – (10 000) – 10 0000 (kb/s)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
Create a new zone with default values for the parameters:
p1 = 10 000 (kb/s)
p2 = BQ
p3 = 10 000 (kb/s)
p4 = BQ
p5 = shared
Change parameters of a zone. All parameters must be
reentered, even those that are unchanged.
Remove a zone.
Disable a zone. When a zone is disabled, no new calls are
established inside, from, or toward this zone.
Enable a zone.
Print zone and bandwidth information, where xxx specifies
a zone. If no zone is specified, information for all zones
is printed. PRT ZONE ALL also prints information for all
zones.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008