Configure The Expansion Module For Ip Phone 1100 Series - Avaya Nortel Communication Server 1000 Manual

Prompt Response
KEMOFST <KEM>
<KeyOffset>
KEY xx
Configure the Expansion Module for IP Phone 1100 Series
Configure the optional Expansion Module for IP Phone 1100 Series
(Expansion Module) in LD 11.
The IP Phone 1120E, IP Phone 1140E, and IP Phone 1150E support the
Expansion Module.
Table 82
LD 11 Configure the Expansion Module
Prompt
REQ
TYPE
...
KEM
...
CLS
Copyright © 2003–2008, Nortel Networks
.
Description
Automatically calculates the IP Phone KEM key based
on the entered values. This prompt enables the system
administrator to enter a KEM number of 1 or 2 and a Key
Offset number from 0 to 23. Once entered, the KEY prompt
is prompted with the appropriate KEY value filled in.
Enter <CR> to terminate data entry.
When values are entered for KEM and KeyOffset, the KEY
xx prompt displays, followed by KEMOFST prompt. This
loop continues until no values (<CR> only) are entered at
the KEMOFST prompt.
This applies an IP Phone 2002 if <CR> was entered at the
KEY prompt, and an IP Phone 2004 with KEM = 2, and
where <CR> was entered at the KEY prompt.
Edit the IP Phone KEM key number specified by
KEMOFST, where:
xx = the number of the key (for example, KEY 36)
Enter <CR> to keep the current setting.
Response
NEW/CHG
1120, 1140, 1150
...
(0) - 3/ <CR>
...
KEM3
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Initial configuration of IP Line data 265
Description
Add new or change existing data.
For IP Phone1120E, IP Phone 1140E, and
IP Phone 1150E
...
Number of attached Expansion Modules
(0). Up to three Expansion Modules are
supported.
...
KEM3 CLS is defined.