Accessing The Uftpturbomodeshow Command - Avaya Nortel Communication Server 1000 Manual

106 Features
5
6
7
uftpTurboModeShow
The uftpTurboModeShow command displays the current status
of Maintenance Mode (None/Active/Scheduled). To access the
uftpTurboModeShow command using Element Manager, follow the steps in
Procedure 3 "Accessing the uftpTurboModeShow command" (page
Procedure 3

Accessing the uftpTurboModeShow command

Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
From the Command drop-down list, uftpTurboMode.
If you select the HH:MM option, enter the time in the Hours and
Minutes text boxes. No other option requires parameters.
Figure 19
uftpTurboMode window in Element Manager
Click Run.
The command output is displayed in the pane below the command.
Action
In the navigator, select IP Network > Maintenance and Reports.
The Node Maintenance and Reports window appears. See
17 "Node Maintenance and Reports window" (page
Click the plus sign (+) to the left of the Node ID of the desired node
to view the node elements.
Click the GEN CMD button for the desired Signaling Server.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—
106).
Figure
105).