Configure The Ip Phone 1200 Series Key Expansion Module - Avaya Nortel Communication Server 1000 Manual

Configure the IP Phone 1200 Series Key Expansion Module
Configure the optional IP Phone 1200 Series Key Expansion Module (KEM)
in LD 11.
The IP Phone 1220 and IP Phone 1230 support the IP Phone 1200 Series
KEM.
Table 83
Configure the IP Phone 1200 Series KEM
Prompt
REQ
TYPE
...
KEM
...
KEY
PAGEOFST
Copyright © 2003–2008, Nortel Networks
.
Response
NEW/CHG
1220, 1230
...
(0) - 4/ <CR>
...
0 - <see text>/ <CR>
<Page>
<KeyOff-set>
<CR>
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Initial configuration of IP Line data 267
Description
Add new or change existing data.
For IP Phone 1220, IP Phone 1230
...
Number of attached Expansion Modules
(0). Supports up to four Expansion
Modules.
...
Key number range depends on the
number of IP Phone 1200 Series KEM
modules specified by KEM prompt:
xx = key number
For the IP Phone 1230:
xx = 0 to 31 when KEM = 0
xx = 0 to 55 when KEM = 1
xx = 0 to 79 when KEM = 2
xx = 0 to 67 when KEM = 3
xx = 0 to 79 when KEM = 4
For the IP Phone 1220:
xx = 0 to 31 when KEM = 0
xx = 0 to 43 when KEM = 1
xx = 0 to 55 when KEM = 2
xx = 0 to 67 when KEM = 3
xx = 0 to 79 when KEM = 4
This prompt appears if one or two IP
Phone 1200 Series KEM are specified
at the KEM prompt, if <CR> is entered
at the KEY prompt, and if attached to
an IP Phone 1230.
This prompt enables the administrator
to enter:
Page number =
0 for KEM 1
1 for KEM 1 when you configure 1 KEM
and 2 KEM when you configure 2 KEMs