Call Server Commands - Avaya Nortel Communication Server 1000 Manual

90 Features
Command
uftpTurboModeShow
The following is an example of output when Maintenance Mode is to start at
11 p.m.
oam> uftpTurboMode "23:00"
oam> 28/07/04 08:23:56 LOG0006 shell:
Maintenance Mode will start after 52564 seconds

Call Server commands

LD 20
A response ISET is introduced to the LD 20 TYPE prompt. When ISET is
entered, the prompt MODEL_NAME is displayed. The MODEL_NAME
prompt allows a user to specify the Short Model Name mnemonic for
filtering the output of TN blocks. If only the ISET response is used, printed
TN blocks contain the long IP Phone Model Name in the output.
LD 20 Listing or printing TN blocks of specified IP Phone model
Prompt
REQ
TYPE
...
MODEL_NAME
...
The following is an example of the input and output.
>ld 20
REQ: PRT
TYPE: ISET
TN
CUST
TEN
DATE
PAGE
DES
MODEL_NAME: 2004P2
KEM_RANGE
IP_PHONE_MODEL: IP PHONE 2004 PHASE2
Copyright © 2003–2008, Nortel Networks
.
Description
If no parameter is entered, then the current timeout setting
is displayed.
Displays current status of Maintenance Mode.
Response Description
LTN List TN blocks.
PRT Print TN blocks.
ISET Enable filtering by IP Phone model name.
...
xxxxxx
IP Phone model
For example, 2004P2
...
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
F/W upgrade