Avaya Nortel Communication Server 1000 Manual page 466

466 Voice Gateway Media Card maintenance
For more information about IP Phone installer password commands
commands, see Software Input Output Reference—Maintenance
(NN43001-711).
Table 135
IP Phone Installer Password commands
Command
nodePwdSet "password"
nodePwdShow
nodePwdEnable
nodePwdDisable
Copyright © 2003–2008, Nortel Networks
.
Description
Sets and enables the administrative IP Phone
Installer (node) Password. This is also known as the
node level IP Phone Installer Password.
If a null password (0 characters in length) is
configured, all IP Phones that attempt to register
after this command has been issued display a
prompt for node password before the TN can be
modified.
The "password" parameter must be null or 6 to 14
digits in length; The valid characters are 0 to 9, *,
and #.
The null password causes the Node ID and
Password screen on the IP Phone to be skipped
during restart. This command can be entered at any
time; the new password entered overwrites the prior
password.
Displays the settings of the IP Phone Installer
Password. The command displays the
current password, the state of password entry
(enable/disable), the temporary password, and the
number of uses and time to expiry.
Enables the administrative IP Phone Installer
Password setting. After this command is entered, all
IP Phones registering display the password screen.
Disables both the administrative and the temporary
IP Phone Installer Password settings. After this
command is entered, all IP Phones display the
original Node ID and TN screen during registration.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
X
X