Procedure 79 Reconfiguring A Voice Gateway Media Card Running Cs - Avaya Nortel Communication Server 1000 Manual

552 Appendix F Moving Voice Gateway Media Cards between systems
Scenario 3
This scenario applies if the Voice Gateway Media Card:
•
•
•
Use
1000 Release 4.0 or earlier (Leader or Follower)" (page 554)
a Voice Gateway Media Card running CS 1000 Release 4.5 or later, where
the card was configured as a Follower on the original system.
Procedure 79
Reconfiguring a Voice Gateway Media Card running CS 1000 Release 4.5 or
later (Follower on original system)
Step
1
2
3
4
Copyright © 2003–2008, Nortel Networks
.
Figure 113
Message output for the Voice Gateway Media Card (Leader)
came from a system running CS 1000 Release 4.0 or earlier
was a Leader or a Follower in the original system
is moving to a CS 1000 Release 4.5 system or later
Procedure 81 "Reconfiguring a Voice Gateway Media Card running CS
Action
Enter the user name and password that was synchronized from the
Call Server.
Access the card by the EIA232 Maintenance port.
Upgrade the Voice Gateway Media Card 8051XA Controller
firmware, if necessary.
Upgrade the Voice Gateway Media Card software, if necessary.
To upgrade the Voice Gateway Media Card software using Element
Manager, see "Upgrade the Voice Gateway Media Card software
and IP Phone firmware" (page
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
307).
to reconfigure