Avaya Nortel Communication Server 1000 Manual page 480

480 Voice Gateway Media Card maintenance
Command Description
The pnew command has no parameter.
Patch Directories
There are two patch directories on a Voice Gateway Media Card:
1. /C:/u/patch
2. /C:/u/patch/reten
Patch Synchronization Across a Node
Element Manager provides a mechanism for downloading and putting
patches in service across a node.
Patch synchronization across a node cannot be carried out from the IPL>
prompt.
General trace tool commands
A warm boot of the system causes all tracing to cease. Traces must be reentered
after the system has restarted.
Table 142 "General trace tool commands" (page 480)
tool commands applicable to the Voice Gateway Media Cards. They are
issued from the LTPS prompt of the Voice Gateway Media Cards.
For more information about general trace tool commands, see Software
Input Output Reference—Maintenance (NN43001-711).
Table 142
General trace tool commands
CLI Command
traceShow
traceAllOff
Copyright © 2003–2008, Nortel Networks
.
This is the default directory for patch files. Patch files should be copied
to this directory.
Use this directory to store patch retention control files. Do not use this
directory to store patches and do not remove files from this directory.
Description
Displays the names of active traces in the system. X
Causes all traces that use the monitorLib server
to stop their output. This is a temporary disabling
function.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
ATTENTION
lists the general trace
Signaling
Server
X