Avaya Nortel Communication Server 1000 Manual page 563

4
Copyright © 2003–2008, Nortel Networks
.
The uid and passwd fields are both default.
File is on the Voice Gateway Media Card /A: drive (previously
transfered there by FTP):
IPL>swDownload
"127.0.0.1", "<uid>", "<passwd>", "</A:/path>",
"<fname>"
File is on the ITG-P card /C: drive (previously copied there or
transfered there by FTP):
PL>swDownload
"127.0.0.1", "<uid>", "<passwd>", "</C:/path>",
"<fname>"
File is on the Signaling Server (loaded during install/upgrade):
IPL>swDownload
"<SS ELAN IPaddr>", "<uid>", "<passwd>", "</u/fw>",
"<fname>"
File is on another Voice Gateway Media Card /C: drive (previously
transfered there by FTP):
IPL>swDownload
"<VGMC ELAN IPaddr>", "<uid>", "<passwd>",
"</C:/path>", "<fname>"
File is on the MAT/TM PC:
IPL > swDownload
"<PC's IP addr>", "itguser", "itguser", ",",
"<fname>"
File is on a network FTP server:
IPL>swDownload
"<server's IP addr>", "<uid>", "<passwd>", "<path>",
"<fname>"
File is on the Call Server CPU drive:
IPL > swDownload
"<Call Server IPaddr>", "<dummyuid>", "<pdtpswd>",
"<path>", "<fname>"
At the IPL> prompt, enter
cardReset
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Upgrading the software 563
ATTENTION