Call Statistics Collection - Avaya Nortel Communication Server 1000 Manual

Ip line fundamentals
Hide thumbs Also See for Nortel Communication Server 1000:
Table of Contents

Advertisement

168 Features
CONFIG.INI and BOOTP.TAB configuration files from the Call Server. The
Voice Gateway Media Cards are notified to FTP the files from the Call
Server.
TM 3.1 Navigator incorporates links to each Element Manager Web server
in a network.
BOOTP and CONFIG.INI
If the Voice Gateway Media Card is a Follower of a primary Signaling Server,
it generates a BOOTP request to retrieve its network information. The
request for IP address, node ID, and node IP is directed to a BOOTP server
within its node. If the BOOTP request fails, the Voice Gateway Media Card
uses the last configuration. This fallback configuration data is stored locally
on the Voice Gateway Media Card. If the BOOTP request is successful, the
Voice Gateway Media Card refreshes its current fallback configuration data.
If the Voice Gateway Media Card is located in a stand-alone IP Telephony
node, and is designated as the Leader for its node, it provides BOOTP
service to all other configured Voice Gateway Media Cards within its node.
The Leader determines its own network information using a combination of
locally stored static information and the bootp.tab file.
If the Voice Gateway Media Card is located in a stand-alone IP Telephony
node, and is designated as a Follower, it generates a BOOTP request
to retrieve its network information. The request for IP address, node ID,
and node IP is directed to a BOOTP server within its node. If the BOOTP
request fails, the Voice Gateway Media Card uses the last configuration.
This fallback configuration data is stored locally on the Voice Gateway Media
Card. If the BOOTP request is successful, the Voice Gateway Media Card
refreshes its current fallback configuration data.
The Voice Gateway Media Card reads the contents of the CONFIG.INI file
located on its disk for additional configuration parameters.

Call Statistics collection

IP Line enables statistics on the Quality of Service (QoS) of calls connected
by the Call Server to be collected.
Commands in LD 32 and LD 117 print the number of IP Phones registered
on a card, zone, node, or Signaling Server. Traffic printouts are available
per zone at user-configurable intervals for the following:
Copyright © 2003–2008, Nortel Networks
.
blocked calls
bandwidth used
call attempts and completions
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008

Advertisement

Table of Contents
loading

Table of Contents