Avaya Nortel Communication Server 1000 Manual page 476

Ip line fundamentals
Hide thumbs Also See for Nortel Communication Server 1000:
Table of Contents

Advertisement

476 Voice Gateway Media Card maintenance
IPL> command
UKLossPlanClr
lossPlanPrt
lossPlanSet
<transducer> <rlrOffset>
<slrOffset>
lossPlanClr
Nortel recommends that the loss plan commands be entered on the node
Leader card while it is the node master. This process ensures that the
data is correctly propagated to all cards in the node. When installing a
new Leader card in a node with modified levels, always enter the loss plan
command on the Leader card CLI, even if the command was previously
entered on another card CLI.
When a node has a modified loss plan (that is, the command
ULKLossPlanSet or lossPlanSet has been used), a new card that is
added to the node is updated with the modified loss plan 30 seconds after
the card has booted. Prior to the modified loss plan being received by the
new card, calls made by IP Phones registered to that new card have the
default loss plan levels.
Patch and Patching Tool commands
A patch is a piece of code that is inserted or patched into an executable
program. The Patching Tool enables loadware on the Voice Gateway Media
Cards to be patched or fixed without having to upgrade the card loadware
and without service interruption. All patch commands on the Voice Gateway
Media Cards and Signaling Server are accessible at the PDT prompt level.
These commands are summarized in
477).
Copyright © 2003–2008, Nortel Networks
.
Description
Removes the loss plan adjustment and returns
the IP Phone to the default loss plan levels.
Prints the current IP Phone loss plan settings.
Allows a variable offset from the default loss
plan to be entered for the specified transducer
(handset, handsfree, or headset).
The rlrOffset adjusts the level heard at the
IP Phone. The slrOffset adjusts the level
transmitted from the IP Phone.
Positive numbers reduce the level (add loss).
Negative numbers increase the level (add gain).
Removes the loss plan adjustment and returns
the IP Phone to the default loss plan levels.
CAUTION
Care must be taken when altering the IP Phone loss plan.
Increasing the gain increases the possibility of echo and other
audio problems. Only adjust the levels when instructed by this
document or by Nortel support staff.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
X
X
Table 141 "Patch commands" (page

Advertisement

Table of Contents
loading

Table of Contents