Avaya Nortel Communication Server 1000 Manual page 482

482 Voice Gateway Media Card maintenance
For more information, see Software Input Output Reference—Maintenance
(NN43001-711).
Table 143
Protocol trace tool CLI commands for the NCS
CLI Command
tpsARTrace
IP <IP Address>
ID <user ID>
ALL
tpsARTraceOff
IP <IP Address>
ID <user ID>
ALL
tpsAROutput
<Output_Destination>
<"File Pathname">
Copyright © 2003–2008, Nortel Networks
.
Description
Allows tracing of the tpsAR protocol, which is
used to determine where an IP Phone should
register.
Where:
• IP Address - a string containing the IP
Phone IP address
• user UID - the ID of the IP Phone to be
traced (the DN used to log in) or the
H323_Alias of where the IP Phone is
trying to register
• ALL - all IP Phones are to be monitored
Removes the specified endpoint from the list
of endpoints to be traced.
Sets the output for all tpsAR protocol traces.
Where:
• Output_Destination specifies where all the
trace messages for the tpsARTraceSet
are to be directed.
If the command is run from the Voice
Gateway Media Card or the vxshell
prompt:
The values are:
1 = TTY
2 = RPTLOG
3 = File
4 =TTY + File
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
X