Avaya Nortel Communication Server 1000 Manual page 448

448 Voice Gateway Media Card maintenance
Command Description
Counts and prints the number of IP Phones registered for the specified zone.
ECNT ZONE
zoneNum
<customer>
•
•
•
Example:
ECNT ZONE 0 0
<< Zone 0 Customer 0 >>
Number of Registered Ethersets: 4
Number of Unregistered Ethersets: 17
Counts and prints the number of IP Phones registered for the specified node.
ECNT NODE
nodeNum
•
Example:
ECNT NODE 8765
<< Zone 8765 >>
Number of Registered Ethersets: 3
Counts and prints the number of IP Phones registered for the specified
ECNT SS
Signaling Server.
<hostName>
•
Example:
ECNT SS
<< Signaling Server: BVWAlphaFox IP 10.10.10.242>>
Number of Register Ethersets: 1000
If the hostName variable contains an underscore (_), then an NPR001 error
message is returned, as an underscore is considered to be an invalid character.
Copyright © 2003–2008, Nortel Networks
.
If <customer> parameter is specified, the count is specific to that customer.
A zone must be specified to enter a customer; otherwise, the count is
across all customers.
If no parameters are entered, the count is printed for all zones.
If an IP Phone is logged in to Virtual Office and the parameter entered for
Current Zone (CUR_ZONE) is different from the parameter entered for
Configured Zone (CFG_ZONE), registered and unregistered Ethersets
are counted for both zones.
If the nodeNum parameter is not entered, the count is printed for all nodes.
If hostName parameter is not entered, the count is printed for all Signaling
Servers.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008