Nn43100-500 02.02 Standard Release 5.5 4 February - Avaya Nortel Communication Server 1000 Manual

238 Installation and initial configuration of an IP Telephony node
Step
Configure card as a Leader or
Follower.
Add the card and configure the
card properties
Transmit/Transfer properties
Identify the IPE card slots on a CS 1000M
Depending on the module that is used, the ITG-P 24-port line card must
be installed in a specific slot. Use
installation by module type" (page 238)
selected for the Voice Gateway Media Card.
Table 73
Voice Gateway Media Card installation by module type
CS 1000M modules
NT8D37BA/EC IPE module
NT8D37AA/DC IPE module
EMC restriction must be considered when installing the Voice Gateway
Media Cards.
Installing and cabling the ITG-P 24-port line card
Each ITG-P 24-port line card requires two slots in the CS 1000. Only the
left slot of the card connects to the IPE backplane and I/O panel.
A maximum of eight ITG-P 24-port line cards can be installed in an IPE shelf
in a Large System. The ITG-P 24-port line card can occupy any two adjacent
slots in an IPE shelf, with the left slot of the card plugging into slots 0 to 6
and 8 to 15. The left slot of an ITG-P 24-port line card cannot be plugged
into slot 7, because the XPEC card is situated between slots 7 and 8.
Copyright © 2003–2008, Nortel Networks
.
ITG-P 24-port
line card
In Element Manager:
Procedure 33 "Configuring the
Leader IP address for a second
or subsequent node" (page
302) (Leader)
Procedure 35 "Configuring
the Follower cards" (page
306) (Follower)
In Element Manager:
Procedure 31 "Adding a card
and configuring Voice Gateway
Media Card properties" (page
298)
In Element Manager:
Procedure 34 "Transmitting
node properties to Leader"
(page 304)
Table 73 "Voice Gateway Media Card
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Media Card line cards
In Element Manager:
Procedure 33 "Configuring the
Leader IP address for a second
or subsequent node" (page
302) (Leader)
Procedure 35 "Configuring
the Follower cards" (page
306) (Follower)
In Element Manager:
Procedure 31 "Adding a card
and configuring Voice Gateway
Media Card properties" (page
298)
In Element Manager:
Procedure 34 "Transmitting
node properties to Leader"
(page 304)
to identify the IPE card slots
ITG-P 24-port line card slots
All available IPE card slots
0, 4, 8, and 12