Ip Line Cli Access Using Telnet Or Local Rs-232 Maintenance Port - Avaya Nortel Communication Server 1000 Manual
Ip line fundamentals
Hide thumbs
Also See for Nortel Communication Server 1000:
- Reference (700 pages) ,
- Configuration manual (350 pages) ,
- Hardware installation and maintenance (262 pages)
Table of Contents
Advertisement
5
6
7
8
9
10
11
IP Line CLI access using Telnet or local RS-232 maintenance port
There are two ways to access the Command Line Interface (CLI):
1. Use the NTAG81CA cable to connect the DIN8 pin connector on the
2. Telnet to the card from the TM IP Telephony window. This automatically
Copyright © 2003–2008, Nortel Networks
.
IP Line CLI access using Telnet or local RS-232 maintenance port 435
Click Start retrieve.
The results of the retrieval are shown under Retrieve control. The
node properties are retrieved from the active Leader. The card
properties are retrieved from Leader 0.
Click Close when the download is complete.
In the IP Telephony window, select the newly added node in the top
part of the window.
Refresh the card status (View > Refresh) and verify that the cards
in the newly added node are responding.
A new node has been created by retrieving data from another node
Double-click on the new node in the IP Telephony window. The
Node Properties window appears for the newly-added node.
Inspect each tab in the node properties and verify the data is correct
and consistent with the node from which the data was retrieved.
Click the Configuration tab and ensure the Host names information,
IP addresses, and TN are consistent.
faceplate, or the NTAG81BA cable to connect the DB9 I/O breakout
cable to the COM port of a local PC. Use a null-modem adapter to
connect a modem for remote dial-up access.
Telnets to the IP address of the Management interface (ELAN) of the
card. Alternatively, use the Telnet application on a PC and manually
enter the Management (ELAN) IP address, Voice (TLAN) IP address, or
the node IP address if trying to connect to the active Leader.
CAUTION
Do not connect two maintenance terminals to both the faceplate
and I/O panel serial maintenance port connections at the same
time.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—
Advertisement
Table of Contents
