Contents; Introduction - Avaya Nortel Communication Server 1000 Manual

Configuration of IP Telephony nodes
using Element Manager

Contents

This section contains the following topics:
•
•
•
•
•
•
•
•

Introduction

This chapter explains how to configure IP Telephony nodes and Voice
Gateway Media Cards using Element Manager. Element Manager is
accessed using a PC with Internet Explorer 6.0.2600 (or later). The PC
must be connected to a LAN that has access to the Signaling Server Node
IP address, either directly or routed through the network.
The ELAN subnet IP address might be required, instead of the Node
IP address, to access the Element Manager logon window in secure
environments.
This chapter also provides instruction for transmitting files to Voice Gateway
Media Cards, upgrading card software, and upgrading IP Phone firmware.
Copyright © 2003–2008, Nortel Networks
.
"Introduction" (page 273)
"Configure IP Line data using Element Manager" (page 274)
"Transfer node configuration from Element Manager to the Voice
Gateway Media Cards" (page 301)
"Upgrade the Voice Gateway Media Card software and IP Phone
firmware" (page 307)
"Assemble and install an IP Phone" (page 319)
"Change the default IPL CLI Shell password" (page 319)
"Configure the IP Phone Installer Passwords" (page 319)
"Import node configuration from an existing node" (page 320)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
273