Add Another Voice Gateway Media Card - Avaya Nortel Communication Server 1000 Manual

Use the loadware supplied on the Signaling Server installation CD only.

Add another Voice Gateway Media Card

Follow the steps in
to the system" (page 499)
the system.
Procedure 71
Add another Voice Gateway Media Card to the system
Step
1
2
3
4
5
6
7
Copyright © 2003–2008, Nortel Networks
.
Procedure 71 "Add another Voice Gateway Media Card
to add another Voice Gateway Media Card to
Action
Install and cable the Voice Gateway Media Card, as described in
"Install the hardware components" (page
Go to the VxWorks shell. Configure the Voice Gateway Media Card
as a Follower using the ELAN network interface IP address and
subnet mask. Restart the card.
The card obtains the ELAN network interface IP address and subnet
mask.
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards.
The Node Configuration window appears.
Click the Edit button associated with the node containing the card
to be replaced.
The Edit window appears.
Expand the Cards section by clicking the plus sign (+) to the left of
Cards.
Click Cards and then click the Add button.
The fields to be configured for the new card are displayed.
Enter the Card Properties data.
a. Role: The role is assigned based on the information that
Element Manager reads from the card configuration. This is a
read-only field.
b. Embedded LAN (ELAN) IP address: This is the ELAN network
interface IP address for the card. Element Manager and the
system use this address to communicate with the card.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Add another Voice Gateway Media Card 499
ATTENTION
236).